Resource Library

Innovation in AEC - High Tech/Low Tech

Innovation in AEC - High Tech/Low Tech

Eddie Can, Senior Associate at Zaha Hadid Architects, keynote presentation at the 2018 Global ATC. During his speech Mr. Can will focus on the relationship between highly complex design documents and construction technique that minimize cost wh...

ATC Presentations, Videos
Experimentation Matters: Driving Innovation Through Simulation

Experimentation Matters: Driving Innovation Through Simulation

Prof. Stefan Thomke, William Barclay Harding Professor of Business Administration at Harvard Business School, keynote presentation at the 2018 Global ATC. Why do companies constantly come out with exciting innovations while others have great di...

ATC Presentations, Videos
Automotive NVH Development - Past, Present, and Future Technology Challenges

Automotive NVH Development - Past, Present, and Future Technology Challenges

Dr. Per-Olof Sturesson, Senior Director Driving Dynamics and Noise & Vibration Centre at Volvo Cars, keynote presentation at the 2018 Global ATC. Over the last decades, the utilization of CAE has increased substantially in the vehicle NVH refin...

ATC Presentations, Videos
The Digitalization Trends and Structural Design in Maritime Industry

The Digitalization Trends and Structural Design in Maritime Industry

Dr. Toshiro Arima, Corporate Officer, Director of Rule Development and ICT Division at ClassNK, keynote presentation at the 2018 Global ATC. In this presentation, the current state of digitalization of maritime industry, structural rules and e...

ATC Presentations, Videos
The World is Built on Engineering

The World is Built on Engineering

Dr. Uwe Schramm and James Dagg, CTOs at Altair, keynote presentation at the 2018 Global ATC. This presentation will illustrate the power of Altair’s simulation technology through several practical examples applied to some of the most common produ...

ATC Presentations, Videos
Technology as Key Enabler for Product Innovation

Technology as Key Enabler for Product Innovation

Sam Mahalingam, CTO at Altair, keynote presentation at the 2018 Global ATC. As a technologist I have been following the technology trends and have identified three trends that can immensely change the product innovation landscape and they are: ...

ATC Presentations, Videos
Taking Control of the Wind and Waves with DSA

Taking Control of the Wind and Waves with DSA

A brief introduction to DSA, their two products available through the APA, and how they are applied to the oceanographic engineering process.

Video Testimonials, Videos
Design the Difference – Simulation Driven Innovation in Car Body Design

Design the Difference – Simulation Driven Innovation in Car Body Design

Dr. Lars Fredriksson, Business VP – Simulation Driven Innovation at Altair presenting on behalf of NEVS at the 2017 European ATC. The automotive industry is experiencing ever increasing requirements on new vehicles from all directions. Still, d...

ATC Presentations, Video Testimonials
To the Moon with Additive Manufacturing - Optimization, Space and Everything in Between

To the Moon with Additive Manufacturing - Optimization, Space and Everything in Between

Yoram Malka, Head of Mechanical Engineering Department at Israel Aerospace Industry presents at the 2017 European ATC. Increasing the performance of a system is a constant challenge engineers in all application areas face. This challenge specif...

ATC Presentations, Videos
Vehicle Concept and Structure of the New Opel Ampera-e

Vehicle Concept and Structure of the New Opel Ampera-e

Dr. Hennig Holzmann and Dr. Boris Künkler of Adam Opel present at the 2017 European ATC. The new Opel Ampera-e offers the customer a great car with the optimum balance regarding performance, package, mass and cost.

ATC Presentations, Videos
When Simulation Turns into Reality

When Simulation Turns into Reality

Dominique Moreau, Head of Airframe Technical Authority, Airbus presents at the 2017 European ATC. This presentation will present the today’s state-of-the-art numerical simulation and the very latest progress Airbus did on the topic. The present...

ATC Presentations, Videos
Design the Difference: Artemis Racing’s use of Simulation Driven Design Technology in Pursuit of the 2017 America’s Cup

Design the Difference: Artemis Racing’s use of Simulation Driven Design Technology in Pursuit of the 2017 America’s Cup

Peter Bentley, Design Team Member at Artemis Racing presents at the 2017 European ATC. The increase in velocity enabled by advanced structural composites and on-board control systems has been a true game changer, and the future of sailing will ...

ATC Presentations, Videos
Industry 4.0 – How Digitalization Makes Weight & Balance Process More Agile and Connected

Industry 4.0 – How Digitalization Makes Weight & Balance Process More Agile and Connected

Kai Thräne, Manager Weight & Balance Research & Development at Airbus Helicopter presents at the 2017 European ATC. In the context of Industry 4.0, most enterprise processes must become more digitized. A key element will be the evolution of the...

ATC Presentations, Videos
The Secret Lives of Models

The Secret Lives of Models

Gael Salles, Director of Computer Aided Product Engineering Technology at Schneider Electric presents at the 2017 European ATC. After a brief introduction of the changes in the Energy Landscape, an analysis of the life of models will be present...

ATC Presentations, Videos
Altair FEKO for Marine EMC Applications

Altair FEKO for Marine EMC Applications

Altair FEKO is a leading comprehensive electromagnetic analysis software package, which is widely used in many industries and built on state of the art computational electromagnetic techniques to provide users with solutions to a wide range of ele...

Videos
Showcase Video: TAITherm

Showcase Video: TAITherm

Introductory video to TAITherm from ThermoAnalytics.

Video Testimonials, Videos
What are the Concept Challenges?

What are the Concept Challenges?

See how the C123 process helps you to find concept challenges.

Videos
Novum: University of Michigan Participates in Solar Car Challenges Around the World

Novum: University of Michigan Participates in Solar Car Challenges Around the World

See how Altair

Videos
Simulating the Powertrain Development Process with AVL

Simulating the Powertrain Development Process with AVL

A brief introduction to AVL, their three products available through the APA, and how they are applied to the powertrain development process.

Video Testimonials, Videos
Click2Cast Workflow - Step 2: Define Ingate and Mesh

Click2Cast Workflow - Step 2: Define Ingate and Mesh

Step 2: Define Ingate and Mesh

Videos
Showcase Video: RAMDO

Showcase Video: RAMDO

Introductory Video to RAMDO from RAMDO Solutions. RAMDO is an uncertainty quantification, reliability analysis, and design optimization software platform.

Videos
Design Lightweight and Efficient Stamping Dies with Topology Optmization

Design Lightweight and Efficient Stamping Dies with Topology Optmization

Ford Otosan in Turkey designs big stamping dies with the help of topology optimization using OptiStruct. Weight savings of 20% were possible on their first attempt to try optimization on a new stamping part.

Video Testimonials
Showcase Video: GE's Flow Simulator

Showcase Video: GE's Flow Simulator

Introductory video for Flow Simulator software by GE for integrated flow, heat transfer and combustion design.

Videos
Multiscale Designer Product Video

Multiscale Designer Product Video

Multiscale Designer can help achieving more accurate and cost saving results by looking into the individual constituent of composite materials. The tool is well suited for woven, short and long chopped fiber composites and integrates with Altair

Videos
Sunshine School Bus Design Story - Industrial Design for Automotive

Sunshine School Bus Design Story - Industrial Design for Automotive

Sathiya Seeland, Head of Styling for Product Design at Ashok Leyland, presents at Converge 2016 in Bangalore, India.

ATC Presentations, Videos
Design for High Performance Recreational Products

Design for High Performance Recreational Products

Pankaj Dubey, Country Head and Managing Director at Polaris India, presents at Converge 2016 in Bangalore, India.

ATC Presentations, Videos
AFDEX V18 New Features Video

AFDEX V18 New Features Video

New features and improvements in AFDEX V18R01.

Videos
Designing Optimized Aluminum Castings with Fatigue Life Considerations

Designing Optimized Aluminum Castings with Fatigue Life Considerations

Andras Tanos, R&D Engineer at FemAlk ZRT, talks about how they have used Altair solutions for topology optimization of an engine part.

Video Testimonials, Videos
Innovative Use of Composites for Organic Architecture

Innovative Use of Composites for Organic Architecture

In this interview recorded at JEC World 2018, Atanas Zhelev, Chief Architect and co-founder at Digital Architects Ltd., talks about the innovative use of composites for organic architecture. Composites offer designers the ability to create a ma...

Video Testimonials, Videos

Innovate Philippines' AEC Landscape with Inspire

Tony Pimentel from Pimentel & Associates is innovating the Philippines Architecture, Engineering and Construction landscape with Inspire.

Video Testimonials, Videos
Alpla Develops Innovative Packaging Solutions with HyperWorks

Alpla Develops Innovative Packaging Solutions with HyperWorks

Alpla develops and produces packaging solutions for consumer goods. Christoph Plankel, Head of Modeling and Simulation Department at Alphla, discusses how they have used simulation to produce lighter packaging without compromising on performance.

Video Testimonials, Videos
Rapidly Exploring Electric Vehicle Architectures with C123

Rapidly Exploring Electric Vehicle Architectures with C123

To overcome the challenges of developing a vehicle architecture shared across a range of electrical vehicles, National Electric Vehicle Sweden (NEVS) leveraged Altair’s unique three stage concept development process, C123 using a combination of op...

Videos
The Design Revolution Offered by Combining Additive Manufacturing with Simulation Driven Design

The Design Revolution Offered by Combining Additive Manufacturing with Simulation Driven Design

Topology optimization is a computer based calculation procedure which can design mechanically stressed component structures in such a way that the highest possible rigidity can be achieved with minimal material usage. Only those parts of a compone...

Videos
Use of Composites Materials in Architecture

Use of Composites Materials in Architecture

Atanas Zhelev and Mariya Korolova (Digital Architects - Vienna, Austria) and Daisuke Hirose (Archicomplex - Tokyo, Japan) made a design proposal for the Architecture competition for a bid at the Varna Library in Bulgaria. Their proposal features a...

Videos
Sella Chair - Form Follows Performance

Sella Chair - Form Follows Performance

Short video describing the design and production of a design chair by Architect Atanas Zhelev (Digital Architects, Vienna, Austria). This design piece demonstrates the feasibility of his Active Grid Monocoque System (AGM) he uses in his work for h...

Videos
Design Research Experiences at ZH CoDe

Design Research Experiences at ZH CoDe

Filippo Nasetti, Senior Associate at Zaha Hadid, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos
The Digitalization of Biomimicry Design from the Ocean

The Digitalization of Biomimicry Design from the Ocean

Sebastian Möller, Projektleiter at ELiSE Alfred Wegener Institut, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos
A Tooling Revolution for Plastic Injection Molding

A Tooling Revolution for Plastic Injection Molding

Stefan de Groot, Technologist Additive Manufacturing at PROTIQ, presents at Converge 2017 in Essen, Germany

ATC Presentations, Videos
Taming Smart Materials to Behave

Taming Smart Materials to Behave

Doris Sung, Founder of DOSU Studio Architecture, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos
High Performance, Dynamism and Autonomy for Humans

High Performance, Dynamism and Autonomy for Humans

Greg Lynn, Principal at FORM, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos
219 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!